Basic Info.
Color Temperature
Optional
Drive Mode
Constant Voltage
Light Mode
PWM Controller
Output Port
Sm 03V-Bc(1: Output+ 2: Nc 3: Output-)
External Trigger Voltage
12V-24V(Current: About 5.6mA)
Trigger Delay
<40us ( Load Dependent)
Using Temperature& Humidity
Temp:0-40°, Humidity: 20-85%Rh
Storage Temperature& Humidity
Temp:-20-60°, Humidity: 20-85%Rh
Input Voltage
AC100-240V 50/60Hz
Transport Package
Plastic Bubble Bag+ Carton
Product Description
SD2-24V36-2T 2 channel high quality machine vision lighting digital illuminator controller
Products introductionThe SD2 controller is a vertical programmable digital controller that is designed for driving machine vision LED light source. It has functions of a remote control and manual operation for LED light source by RS232 interface to achieve 1000 levels brightness setting, also, it has anti-misoperation system, the display will be locked when it is under misoperated, a light source switch, a hardware external light source switch, manual adjusting brightness, digital display and so on, which is especially suitable for complicated and sophisticated machine vision devices. Specification:- Mechanical Parameter
- Material of the shell: Stainless steel
- Color: Black
- Size: 120*100*80(H*L*W)
- Weight: 1000g
- Cooling method: forced cooling
- Electrical Parameter
- Channel: 2
- Input voltage: 100-240V AC
- Output voltage: DC24V
- MAX output current: Total 1.5A, MAX 1.5A for single channel
- Max efficiency: >80%
- Max power consumption: 36W
- Brightness adjustment parameter
- Adjust mode: PWM control
- Brightness level: 1000 level
- Manual adjustment: Set the channel and brightness level through the button on the panel.
- Remote control: Set the channel and brightness level through cable with RS232 interface or network cable connect to the host computer, and the light on/ off
- RS232 Communication BPS: 19200BPS
- Save and lock/ unlock the screen: Press the "M" for 2 second to save and lock the current brightness value, Press the "M" again for 2 second to unlock.
- Trigger parameter
- External trigger mode: Positive and negative triggers are optional (refer to the wiring instructions)
- External trigger input: Set the light on/ off by remote control through three stalls, respectively high, level and low input
- Trigger delay: <40us
- External trigger frequency: <=1K Hz
- Protection
- Over current protection: Over 3A for single channel, ERROR light is ON
- Short-circuit protection:
Parameter List- 1 Power Indicator(The green light will be lighted up after the power is switched on).
- 2 Display indicator(blue light will be lighted up after the digitron is locked)
- 3 Fault indicator(red light will be lighted up if the controller has a malfunction)
- 4 M channel switch button(used for channel switch and constant light, constant off mode switch )
- 5 Brightness switch(The digitron will move one step to the right for every press).
- 6 Output port(CH1-CH4 are output ports, adopted SMP-03V-BC interface, 1: output+ 3: output-)
- 7 Serial communication port (Connect with PC through serial cable, corresponding to the pin 2,3,5)
- 8 AC socket (input power: 100-240V AC)
- 9 Channel+ luminance value (The first number is channel and constant light, constant off mode, the second, third and forth number are showing from 000-999 level luminance setting).
- 10 Brightness setting button (+: increase, the number of digit will increase 1 for every press; -: decrease, the number of digit will decrease 1 for every press)
- 11 External trigger port(COM: input common port, could be positive or negative, TR1-TR4 corresponds to CH1-CH4, which is the other side of trigger input ).
- 12 Power switch
- 13 FG terminal blocks, grounding.
Wiring Instructions1 Power connection2 Light source connection3 RS232 connection ( It can be omitted if manual adjustment ). As is shown below:4 External trigger connection: connect external trigger signal to the controller if external trigger is needed.Define the trigger port: COM can be positive or negative, trigger level: DC12-24V.Define the trigger port as below:| TR1 | TR2 | COM | COM |
| CH1 Trigger | CH2 Trigger | common port | common port |
| Communication protocol | RS232 |
| BPS | 19200 |
| Data Bits | 8 |
| Stop bit | 1 |
| Check bit | 0 |
| Communication Formats | S | A/B/C/D | 0000-0999 | T/F | C | # |
| Illustrate | Start | CH1/CH2/CH3/CH4 | Brightness value | T: ON
F: OFF | C: setting
R: Reading | End |
| First NO. | Second NO. | Third- Sixth NO. | Seventh NO. |
W: write in
R: Read | Channel: A/ B/ C/ D respectively to CH1, CH2, CH3, CH4 | Brightness value level from 0000 to 0999 | T: ON
F: OFF |
Address:
Building C, No. 5, Weiheng Road, Niushan Waijing Industrial Park, Dongcheng Street, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Founded in 2015, Dongguan chuangshi Automation Technology is a national High-Tech manufacturing enterprise specializing in R&D of machine vision lighting sources. We serve more than 3, 000 global enterprise customers with satisfying personalized product design(OEM/ODM) and comprehensive machine vision solutions. Our business scope includes machine vision LED light source, controller, industrial camera, industrial lens, etc.,
Chuangshi Automation Technology is headquartered in Dongguan China, also with branches in Chengdu, Jiangsu, Kunshan, Wuhan, and each Branch with R&D centers. We are one of the leaders in the field of industrial lighting in China and have excellent achievement in image acquisition, optical imaging and industrial lighting area.
Our goal: Shinning light to the room where it′s needed.
Our value: Passion, collaboration and continuous innovation
Solutions:
It is used with an industrial camera for Using machines instead of human eyes to do measurement and judgment, feature extraction and identification, color detection, blob detection, and so on, it′s one of the very important steps in industrial automation production
){kind=link}